Watt and Sea - AMZ Yachting

Hydrogenerators Cruising

Watt&Sea’s hydrogenerators propose an energy self-sufficiency solution on board of cruise or race boats, in the respect of the environment.

optimal output associated to a negligible drag, letting the boat sail with a positive energy while loading the batteries.

Wattandsea overview

Watt and Sea Hydrogenerator models

  • CRUISING 300 Hydrogenerator

    The CRUISING 300 is usually recommended to boats measuring up to 35 feet :

    Available in two lengths in order to optimize the immersion of the propeller depending on the place chosen for the fitting. Ideal on boats sailing generally from 4 to 6 knots, and consuming around 8 Amps (12 V installation)

    Delivered in standard with the 240 mm diameter propeller (output 8 Amps at 5,2 knots), it will produce even more with the 280 mm propeller (8 Amps at 4,5 knots)

    Mobile application : converter equipped with a Bluetooth chip allowing the reading of charge data, various technical information, as well as the adjustment of voltages if necessary (Lithium battery)

    Available in 2 versions :

    • short (Ref. PK-610-300)
    • long (Ref. PK-970-300)

    • Output 100 W from 5 knots
    • Light : 6,3 kg
    • Two years warranty
    • Quiet
    • Hydrodynamic Design
  • Cruising 600 Hydrogenerator

    Up to 600W of electrical production, ideal for sailing boats over 35 feet.

    For cruises, races and transatlantic, in total energy self-sufficiency. The output power increases in an exponential way over 6 knots.

    Delivered in standard with the 240mm diameter propeller (10 Amps at 5.6 knots), the CRUISING 600 accepts a range of 4 propellers for speed range from 3 to 20 knots.

    Mobile application : converter equipped with a Bluetooth chip allowing the reading of charge data, various technical information, as well as the adjustment of voltages if necessary (Lithium battery)

    Available in 2 versions :

    • Short (Ref. PK-610-600)
    • Long (Ref. PK-970-600)

     


    • Output 120W from 5 knots
    • Light: 7,4 kg
    • Quiet
    • Two-years warranty
  • POD 600 Hydrogenerator

    The hydrogenerator POD 600 is THE innovating solution for sailing boats unable to fastened an hydrogenerator on their transom for technical, mechanical and aesthetic reasons.

    Tested since 2014 by a few privileged sailors, this version has been able to demonstrate those useful advantages :

    • invisible
    • no complicated handling up and down
    • easy start-up
    • electrical output is the same compared to classic models

    The hydrogenerator POD600 is delivered with a 100 mm aluminum leg; it will find its place under the hull of the boat to insure an on-board electrical output with the utmost secrecy.

    • Reference : PK-POD-600

    • Switching on with the ON/OFF button
    • Ideal in original equipment
    • Invisible
    • Output: 120 W from 5 knots
    • Quiet
    • Two-years warranty
  • Cruising 300 Mini6.50 Hydrogenerator

    This 300W hydrogenerator, equipped with a two-blade propeller (composite) with manual adjustable pitch to respond to significant speed variations, becomes the ideal companion for the Mini 6.50. Tested on the last two editions, approved by Marie and Vincent on the Transat 2019, we now offer you 3 variations

    • PK-MINI-300-FA : the 300W hydrogenerator equipped with a removable support with a safety system for locking the male and female parts. An additional support for the other edge or for storage can be added.
    • PK-MINI-300-K : the 300W hydrogenerator with a 500mm long mast, and a bracket to raise the generator when not in use.
    • PK-MINI-300-MA : the 300W hydrogenerator equipped with a 330 mm long mast, without any fixing system.

    Request parts

    If you have any requests concerning our parts, please contact us and our staff will answer you as fast as possible.

    Back to top
    ×