Calypso Instruments - AMZ Yachting

calypso-instruments-logo

Calypso Instruments Anemometers

  • Ultrasonic Portable wind meter

    Calypso Instruments Ultrasonic wired windmeter

    • Bluetooth, solar powered and IPX8 pocket-sized Ultrasonic anemometer
    • Secondary sensors: Thermometer, Gyroscope, Accelerometer
    • Solar panel, internal battery, automatic power management.
    • Anemotracker app will connect to your Portable and provide you with:
      – Apparent wind speed and direction- Real wind speed and direction (if used on a vehicle or boat)
      – Track your wind data and export via excel or Google Earth.
      – Configure the units of measure: m/s, km/h, Kt,
      – Threshold alarm, direction offset, map mode, etc…
  • Ultrasonic wired Ultra Low Power (ULP) wind meter

    Calypso Instruments Ultrasonic wired Ultra Low Power (ULP) wind meter

    • Ultra-low power RS485 Ultrasonic anemometer
    • NMEA0183 (RS422, RS485) / POLL output
    • 3.3-24 DCV

Getaways and Range Extenders

  • NMEA Connect Plus Getaways

    • NCP_BT0183  Connect your Bluetooth ULTRASONIC PORTABLE wind meter data to NMEA 0183 network. Allows the connection of 2 Bluetooth devices at the same time.
    • NCP_BT2000: Connect your Bluetooth ULTRASONIC PORTABLE  wind meter data to NMEA 2000 network.  Allows the connection of 2 Bluetooth devices at the same time.
    • NCP_W2000:  Connect your Ultra-Low Power ULTRASONIC  wind data to NMEA 2000 network. Allows the connection of 2 Bluetooth devices at the same time.
    • NCP_HighEnd: Receives wind data from any ULTRASONIC wind meter within Calypso´s range of products. Converts NMEA0183 wind sentences and/or Bluetooth signal into NMEA 0183 network, NMEA2000 network and Bluetooth. It can also be used as range-extender using it as a Bluetooth-repeater.

Calypso Instruments Accessories

  • Aluminum Pole

    • Top made it to fit Ultrasonic anemometers (M16x1,5 aluminum male thread)
    • Base compatible with standard VHF antenna mount (1″-14 UNS thread, Ø 20 drill to allow wiring)
    • 2 sizes available: 33cm & 100cm
  • Carbon Fiber Pole

    • Top made it to fit Ultrasonic anemometers (M16x1,5 aluminum male thread)
    • Base compatible with standard VHF antenna mount (1″-14 UNS thread, Ø 20 drill to allow wiring)
    • 2 sizes available: 33cm & 100cm
  • Ultrasonic Mast Mount

    • Mount your ultrasonic unit on either side of your mast, both horizontally and vertically.
  • Adapter to Pole 39mm

    Request parts

    If you have any requests concerning our parts, please contact us and our staff will answer you as fast as possible.

    Back to top